Product Description

A new compact loudspeaker from Castle Acoustics always creates a stir of expectation in the world of home audio. That's because its arrival generally marks a rising of the performance standard achieved by small systems.

Castle is confident that the new Durham 3 will maintain this proud record. Castle’s new two-way, rear-ported design uses their proven 19mm, low modulus polyamide dome HF driver, which is offset on the front baffle to reduce diffraction effects and so to improve both clarity and dispersion. It is partnered by a 130mm die-cast bass unit, which uses a woven carbon fibre cone and Kapton voice coil former, wound with copper coated aluminium wire, for outstanding dynamics. Careful tuning of the reflex enclosure brings the Durham 3's bass extension down below 60Hz, giving performance that truly belies its compact (365x190x220mm) dimensions.

All magnet assemblies are fully shielded, making the Durham 3 ideal for use as a front pair in compact AV systems or as a rear pair in more ambitious ones. Just to round things off, and to ensure that the Durham 3 looks as good as it sounds, Castle have rounded the edges of the front baffle, for a smoother, more distinguished appearance. As ever, there's a choice of six standard veneers, plus Yew as a special order luxury option.

Please note: There is a 15% surcharge for Yew finish.

Technical Specifications

Frequency Response: 58Hz-20kHz

Nominal Impedance: 8 ohms

Sensitivity: 88dB for 1w at 1m

Amplifier Requirements: 15-75 watts

System Type: Reflex

Bass Unit: 130mm (5 in.) woven carbon fibre coned, cast chassis

Treble Unit: 19mm (.75 inch) low modulus polyamide

Height: 365mm (14.6 in.)

Width: 190mm (7.6 in.)

Depth: 220mm (8.8 in.)

Weight Each: 6.4kg (14 lbs)

Weight packed: 14.5kg (32 lbs) pair